Shelly 1L for Apple Homekit - no need for a neutral wire
Shelly 1 is a miniature WiFi switch with firmware for the ability to control lights within the Apple HomeKit, which due to its size can be easily installed under a switch or socket in a box. Its creators designed the internal circuits so that you can choose whether you will supply it from the 230 V mains or you will want to switch LED lighting with a 12 V / 24 V supply.
For control outside the home WiFi network, it is necessary to have a home center in the form of a HomePod, iPad or Apple TV.
Shelly 1L Benefits:
Shelly 1 is a switch with miniature dimensions of 41 x 36 x 17 mm, thanks to which you can easily squeeze it under a switch or socket.
The relay has unconnected output contacts, so it's up to you what voltage you want to switch.
It has inputs for a manual switch, which keeps the design of your home in the home.
Choose manual control between the switch or button.
Control and automation via Apple HomeKit .
Voice control via SIRI .
Connection to an existing home without the need for renovation.
Power supply 230 V AC i 12 - 60 V DC
Manual control options:
There are two ways to control Shelly 1:
- Connect a standard switch between the SW-L terminals to toggle the on / off state.
- Connect a push-button switch between the SW-L terminals, press it once to turn it on, press it again to turn it off.
- Momentary switch - function of 1s switch for impulse, eg for garage door control.
Both of these variants can be easily set in the Settings Menu, see the manual.
Specifications:
- AC power supply: 110-230V ± 10%, 50 / 60Hz
- DC Power: No
- Device temperature protection: Yes
- Overload protection: No
- Performance measurement: No
- Dimming: No
- Operation without neutral wire: Yes
- Channels: 1 channel
- Maximum load: 4.1 A (5 A for short operation)
- Minimum load - no neutral connected, with bypass: None
- Minimum load - no neutral connected, no bypass: resistive load 20 W.
- Minimum load - with neutral connected: None
- Operating temperature: 0 to + 40°C
- Device power consumption: <1 W.
- Smart On/Off: Yes
- Local and remote control: Yes
- Sunrise / Sunset: Yes
- Weekly Schedule: Yes
- UL Certification: No
- Capacitive loads supported: motor start capacitors, generators, synchronous motors
- Supported inductive loads: LED lights, transformers, fans, motors
- Resistive loads supported: lights, electric heaters
- Dimmable LED supported: Yes
- Fluorescent lamps supported: Yes
- Fluorescent lamps supported: Yes
- Halogen bulbs supported: Yes
- Supported bulbs: Yes
- Neon bulbs supported: Yes
- Supported non-dimmable LED: Yes
- Wireless / WiFi protocol: 802.11 b/g/n
- Radio frequency: 2400 – 2484 MHz
- Radio signal power: 1 mW
- Range: up to 50 m outdoors and up to 30 m indoors (depending on building materials)
